max468
18-07-2002, 08:40 PM
upgrade to 3315
|
View Full Version : 3315 max468 18-07-2002, 08:40 PM upgrade to 3315 neverperfect 18-07-2002, 08:41 PM yeah but how please clarify or it shall be noted as spam voodoo 18-07-2002, 10:57 PM Flash the 3315 file to your phone,set imei no,set faid and update splocks,done.Use knok 2.2 for the last bit cos eeprom will do a factory reset and you'll lose the extra features. Admin 18-07-2002, 10:59 PM thanks for the info...i might wann try this but i need flasher cables voodoo 18-07-2002, 10:59 PM no problemo Dj_rudeness 22-07-2002, 05:54 PM actually the best way to upgrade is by: 1)flash 3310 v5.57 mcu/ppm to phone 2)flash 3310 virgin eeprom to phone with start address 005F0000 3)open eeprom tools by b-phreaks and click manual 4)write in the imei number from the sticker under yer phone and click ok 5)click the chip(imei repair) 6)click the magnifying glass(FAID update) 7)open KNOK phoenix build 8)click on phone settings,33103315 upgrade 9)reset SP locks in KNOK 10)turn phone on,wait til it resets then u should have network and voila voodoo 22-07-2002, 06:39 PM Why use eeprom tools and knok when knok does everything you need.I've done loads of these and had no problems whatsoever. voodoo 22-07-2002, 06:44 PM Is that flash address right? Dj_rudeness 22-07-2002, 06:53 PM no wait it was 003D0000sorry for the mix up,i used 005f000 on my 3330 to do some illegal stuff ;) voodoo 22-07-2002, 09:00 PM which illegal stuff might that be Dj_rudeness? Dj_rudeness 22-07-2002, 11:12 PM the old change Cough of cough IMEI cough vegeta 24-07-2002, 09:30 PM 3310 to 3315 Picture Editor Personal ringtones for your SMS alert Countdown Timer Timed profiles Multiple SMS sending Keyguard Stopwatch Download flash 3315 1) Flash 3310 with any 5.47 MCU+PPM flash (you may use any flasher program) 2) Start KNok-Phoenix build 1 go to PHONE SETTINGS and hit QUICK FAID 3) Push button 3310 to 3315 4) Go to PHONE SETTINGS and click on QUICK SET FAID 5) Go to MODIFY LOKS and click on Reset SP- LOCK 6) Go to PHONE SETTINGS and click on RESET USER INTERFACE SETTINGS There you go. Your 3310 is now a 3315 (.....almost...) Needed files: * Flasher program * MCU + PPM Flash file 3310 5.47 * Knok-Phoenix build 1 * Flasher cables * MBus cables * Some good luck, just in case... Admin 24-07-2002, 09:34 PM anyone know wer 2 get knok from? Dj_rudeness 25-07-2002, 07:20 PM try schwantz's site.i got mine from there Admin 25-07-2002, 07:22 PM is this method 100% successful? :) king 27-07-2002, 12:40 PM does flashing cabels have mbus and fbus Admin 27-07-2002, 12:41 PM flashing cables plug into the printer port and datacables plug into the serial port!! Dj_rudeness 27-07-2002, 02:35 PM the way i sed is definatley,except the address for the v/e is 003D0000....trust me...flasher cables do not have f/m bus qualities,only data cables do |